HomeCompany ListProduct PhotoGlobal DirectoryPost LeadsTrade Shows
  Home
.

Company Profile
Our Products
Our Factory
Contact Us

shanghai clirik machinery co., ltd



Product Category : Industrial Supplies >> Heavy Equipment
Product Code :
Product Name : garnet grinding mill
Product Info : Garnet species are found in many colors including red, orange, yellow, green, blue, purple, brown, black, pink and colorless. The rarest of these is the blue garnet. It changes color from blue-green in the daylight to purple in incandescent light, as a result of the relatively high amounts of vanadium. Other varieties of color-changing garnets exist. In daylight, their color ranges from shades of green, beige, brown, gray, and blue, but in incandescent light, they appear a reddish or purplish/pink color. Because of their color-changing quality, this kind of garnet is often mistaken for Alexandrite.
Garnet species' light transmission properties can range from the gemstone-quality transparent specimens to the opaque varieties used for industrial purposes as abrasives. The mineral's luster is categorized as vitreous or resinous.
Clirik garnet grinding mill can process garnet grain and garnet powder which can be used as abrasives industry. The following is the introduction about CLIRIK HGM series garnet grinding mill.
The Application of Garnet grinding mill:
HGM series Garnet Grinding mill mainly applied to non-inflammable, non-explosive and brittle materials with Mohs’ hardness under six. Such as calcite, chalk, limestone, dolomite, kaolin, gypsum, etc, totally more than 100 kinds of materials. Product fineness can be controlled between 325~3000 meshes.
Performance and features Of Garnet grinding mill:
1. High efficiency
Under the same final size and power, the product capacity of ultrafine mill is twice than jet mill and agitation mill.
2. Longer lifetime of spare parts
The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.
3. High safety and reliability:
There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.
4. High fineness of products
The product fineness can reach D97=<5um.
5. Environment friendly
The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.
Production Line Configuration of Garnet grinding mill:
The whole set HGM Garnet Grinding mill consists of hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse detester system, high pressure positive blower, air compressors and electrical control systems.
Working Principle of Garnet grinding mill:
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.
Should you have any questions, please do not hesitate to contact us:
Contact person: Cherry. Zhao
Tel: 0086-21-20236178
E-mail: clirik_grinder@163.com;cherry201201@hotmail.com
Address: No.19 Fuqing Road, Pudong New Area, Shanghai 201201, China.
Homepage: http://www.clirik.com
http://www.mill-grinding.com
http://www.grinding-mill.in
http://www.saico.net
http://www.grinding-equip.com



Contact Information
Company :   shanghai clirik machinery co., ltd
Business Type :   Manufacturer
Address :   No.19 Fuqing Road, Pudong New Area, Shanghai 201201, China.
City & Country :   shanghai , China
Tel No. :   0086-21-20236178
Fax no. :   0086-21-58974855
Website :   http://www.90940.tradebig.com
Contact Person :   Cherry Zhao
e-Mail :   Click here to contact us

Bookmark Us | | | Send to friends | | | Site Map
.

------------------------------------------------------------------------------------------------------
About Us - Suggest a Site - Partnering with TradeBIG - Help - Contact Us

Privacy Policy - Terms & Conditions
Copyright © 2024 TradeBIG.com. All Rights Reserved.
Hong Kong Adv: Web Hosting - Web Design - eMail Hosting - HK Domain - Ecommerce